Padico Hearty Soft Clay Color White

180 grams pure white modeling clay.
The clay dries flexible, keeps shape, it is softly light-weighted and water based. As it does not crack even applying it in thick layers.
We recommend using this clay for silicone molds with a depth of 5 mm or more.
If you are using a silicone mold with a depth of 3-5 mm, leave the clay in the mold to dry for about 15-30 minutes, then you can remove the impression from the mold. If your mold is more than 5 mm deep, leave the clay in the mold to dry for 1-2 hours, then you can remove the impression from the mold. If the mold is deeper than 2 cm, leave the clay in the mold to dry for 24 hours.

The impressions remain flexible about one hour. By adding a little moisturizing hand cream to this clay, the casts will remain flexible a little longer and can be easily adhered to round surfaces. It is very important to seal the bag of clay with adhesive tape as soon as you take the necessary piece of clay to work with, otherwise the clay will dry out quickly.

You can color the clay by adding oil paint to it and then press it into a silicone mold. You can also paint the impressions made from clay after drying with acrylic paints, waxes, etc.

The clay is afraid of low temperatures, does not retain its properties at temperatures below -5 degrees Celsius.